Silencers
| Lift Silencers |
 |
Lift silencers are designed for use with engines
positioned on or below the waterline. They are not only a very good silencer but also a means of holding any water that is left in the system when the engine is turned off.
We can supply units with different inlet/outlet
positions from 38 mm (11/2” ) to 355 mm (14”),
vertical or horizontally mounted with various body sizes, all units are manufactured from high temperature GRP and carry Lloyds Type Approval. |
| |
| Dual Chamber Silencers |
 |
Dual chamber silencers are the best wet-exhaust silencer on the market today. Exhaust noise of up to 80% can be achieved and the back pressure created by the unit is minimal. Most units are hand-built with inlet and outlet positioned to suit the particular craft. Some dual chamber
silencers have two inlets to accept the exhaust hose from a V engine. Each inlet has been specifically angled to suit the particular craft and the outlet points straight to the position provided on the hull, all units are
manufactured from high temperature GRP and carry Lloyds Type Approval. |
|
| In-Line Silencers |
| In-line silencers are used where the engine is well
above the waterline or where a high-riser has been
fitted to achieve a 1 in 8 gradient from the engine
to the transom outlet. They are simple to specify
and fit, come in various sizes, can be supplied
with round or oval body’s, inlet and outlet sizes
from 60 mm (2.38”) to 300 mm (12”) all units are
manufactured from high temperature GRP and
carry Lloyds Type Approval. |
|
