HYDROAXE SHAFT DRIVE FIXED ROPE CUTTER

HydroAxe Fixed Slide On Rope Cutter for Shaft Drive applications

The HydroAxe Fixed Slide On Rope Cutter solution for sailing yachts and motorboats with shaft drive applications.

Made In Britain and developed for Shaft Drive applications the HydroAxe Fixed Slide On Rope Cutter will protect propellers from weeds, rope, nets and other debris from fouling the propeller potentially causing expensive damage to your drive train. HydroAxe Rope cutters provide the best protection for your vessel!

The HydroAxe Fixed Slide On Rope Cutters are compatible with low drag propellers and fixed propellers.

Pairing the correct size for your application

You can use the HydroAxe Fixed Slide On Rope Cutter table below to pair the correct size for your application. For assistance please contact the Darglow team.

What’s in the box?

In the box you will receive…

1 x HydroAxe Fixed Slide On Rope Cutter

1 x File to sharpen

2 x grub screws

Tools required for fitting are Power Drill, 5mm or 6mm HSS Drill Bit, 3 mm or 4mm Allen key and wire brush/scotch brite.

You can see HydroAxe Fixed Slide On Rope Cutter fitting instructions here.

Where possible we try to align the D3 measurement with your propeller hub and/or bearing housing. This ensure maximum cutting efficiency.

For assistance please contact the Darglow team.